4090 W and 4110 W models are equipped with a fully synchronised transmission, which gives the tractor a top speed exceeding 34 km/h. Two transmission configurations are available: with a 4-speed gearbox and 2-range splitter, or with a 4-speed gearbox with 3 ranges, offering a total of 16+8 or 12+12 speeds respectively.
Regardless of the configuration chosen, the lowest ratio available lets the tractor work at a ground speed of just 1.14 km/h at maximum engine speed. Ideally spaced ratios let the driver tackle any task with the most appropriate drive ratio to deliver the power and torque needed.

As standard, the PTO features an independent drive shaft and a dedicated, mechanically controlled heavy-duty clutch.
The standard configuration offers the universal 540+1000 rpm combination of speed modes for optimum performance and productivity with high power demand implements. As an option, the 1000 or 540 rpm mode may be replaced by a 540 ECO mode, which minimises fuel consumption when the tractor is hitched to implements with limited power demand.

The open centre hydraulic system is fed by a 50 l/min fixed displacement pump, which in addition to the lift, also delivers oil to the 4-way (or optional 6-way) mechanically controlled rear distributors.
The hydrostatic steering system is fed by a separate, independent pump which ensures effortless and impeccably smooth steering even with the engine at idle speed and/or during simultaneous use of the lift or other hydraulic utilities.
The standard lift has a capacity of up to 1,940 kg and features position control, draft control, float and mixed draft-position control modes, while supplementary double-acting lift cylinders may be added as an option. The supplementary cylinders increase lift capacity to up a 2,250 kg, further extending the range of implements usable with the tractor.

The Heavy Duty axle is equipped with special seals ensuring water-tightness even when submerged; these solutions are chosen for total reliability even in the most challenging conditions, such as when working in the rice paddy. The multiple wet brake discs are integrated into the rear axle. The sturdy final drive units are configured for generous ground clearance.

On the modern farm, superior comfort is a prerequisite even for mid to low-power tractors. The 4W Series is the answer to this need, with a choice of versions with a state-of-the-art, air-conditioned cab with just 4 pillars for total all-round visibility, or versions with a platform suspended on Silent-Block mounts and with a rear roll-bar complete with sunshade roof.
On both cab and platform variants, the driver seat is extraordinarily comfortable, with adjustable mechanical damping, while the comprehensive, modern controls and instruments are organised intelligently and ergonomically around the driver and instantly recognisable to ensure immediate and intuitive control of all the main functions of the machine.