To properly develop the modular concept and to find the most suitable solution for all needs, the transmission versions of the new DEUTZ-FAHR Series Agrofarm 5 are based on a mechanical gearbox with 5 speeds, and many options are available. The first option is the mechanical reverse shuttle or hydraulic PowerShuttle, with the Stop&Go system that allows the control of the moving tractor with the brake pedals alone. This valuable function increases tractor manoeuvrability, specifically when operating with the front loader. The second option regards the Powershift function (2 steps) - 20+20 Hi-Lo or 40+40 Hi-Lo with underdrive and creeper ranges (for a minimum travelling speed of 300 m/h).  Another essential standard feature is the entirely waterproof seal, crucial for work in paddy fields. In any case, the 4WD electro-hydraulic engagement and the 100% lock for both the front and rear differentials are supplied on all models.

The PTO is managed by an independent multi-plate wet clutch unit controlled electro-hydraulically, for smooth and precise engagement and disengagement operations, simply by pressing a button. An external PTO control is also available on the rear. The running of implements requiring PTO becomes perfect in every operation, thanks to speeds available in several combinations (540-540E / 540-540E-1.000-1.000E). Groundspeed PTO comes with an independent shaft. The "PTO AUTO" function manages the PTO automatically, depending on the electronic rear lift position (5115 and 5125 only).

To satisfy every operating need, the new DEUTZ-FAHR Series Agrofarm 5 is offered with a single pump of 55 l/min capacity, and with 4 to 6 rear outlets, mechanically controlled, with a flow regulator and free oil return. All the mechanical distributors are equipped with the "detent" command (i.e. allowing a continuous oil flow) through a mechanical lock of the control lever. The DEUTZ-FAHR rear lift is well known for ensuring the best precision control and efficiency in the tractor category. The new Series Agrofarm 5 comes with a mechanical lift as standard on models 5095, 5105 and 5105 HD, and with a fully electronically controlled version on 5115 and 5125 models. The electronic unit allows some comfortable extra functions, such as maximum height limitation, low-speed dropping, vibration damping system and the auto-PTO. The rear lift can reach a maximum capacity of 5400 kg (depending on the models); the 3-point linkage is category II.

Designed and manufactured in-house, the two versions of the front axle have both 4WD and differential lock engaged electro-hydraulically. The 5095 and 5105 tractors are equipped with a front axle with a maximum admissible load of 2900 kg and maximum steering angle of 50°, while on the 5105 HD, 5115 and 5125 models the load is increased to 3000 kg, and the steering angle to 55°. Superior braking system equipment increases safety levels: disc brakes are fitted on all four wheels. Moreover, a hydraulic trailer braking system makes the DEUTZ-FAHR Series Agrofarm 5 safe even for extended road transport.

The external visibility from the driver seat is excellent both in the daylight and in the dark, thanks to a maximum of 8 working lights (4 front + 4 rear) installed on the roof, and the profile of the one-piece bonnet. The new cab ensures high comfort levels, guaranteed by the introduction of the innovative Hydro Silent-Blocks, able to reduce the vibration level by up to 40% (compared with traditional Silent-Blocks). The tiltable and telescopic steering-wheel column, combined with a suspended seat with several adjustable settings, enables any operator to find the perfect driving position. A low noise level, high-quality materials and precise ergonomic layout make this cab completely comfortable. The cabin can also equip a bracket to support an external monitor or additional devices, a passenger seat, radio, electrical sockets, and smartphone and cup holders.