6G Series tractors come as standard with a hydraulic reverse shuttle, the ComfortClutch push button (which lets the driver shift gear without using the clutch pedal), the Stop&Go function and a 6 speed Powershift gearbox with APS (Automatic Powershift) and SpeedMatching, combined with 4 manually selected ranges to offer a total of 24 forward speeds and 12 reverse speeds. As options, these models may also be equipped with a creeper gear (which doubles the number of ratios available and allows a minimum ground speed, in the lowest gear and at maximum engine speed, of just 370 metres per hour) and a longer fifth range, which increases the number of ratios to 30+15 (or 54+27 with the creeper gear) and which, as it is geared for a theoretical top speed of 75 km/h, makes it possible to drive the tractor at top speed at super-economy engine speed. RCshift versions feature automated range shifting capability, with proportional selector valves and exclusive transmission management developed in-house by DEUTZ-FAHR offering a user experience almost identical to the CVT transmission while still ensuring the superlative fuel economy typical of Powershift range gearboxes.

An unrivalled choice of PTO configurations further contributes to the versatility of these machines, significantly improving efficiency and, as a result reducing fuel consumption, for all applications requiring less than the maximum power output of the engine. All 4 standard speed modes are available as standard on 6G Series tractors. An electrohydraulically controlled PTO clutch is also standard, which uses specific sensors to detect inertial load to ensure that the PTO is started gradually and smoothly. A 1000 rpm front PTO, also with electrohydraulically controlled clutch, is available as an option.

The hydraulic system equipping 6G Series tractors is extraordinarily modular. All versions feature a specific pump dedicated exclusively to the steering system, while a choice of 4 different variants is offered for the main pump. These consist of two fixed displacement pumps, with capacities of 84 and 110 l/min respectively (or 90 and 115 l/min on the 6185 G and 6205 G), feeding a conventional open centre system, and two Load Sensing variable displacement pumps with capacities of 120 and 160 l/min (125 and 165 l/min on the 6185 G and 6205 G), delivering oil to a closed centre system. The rear spool valves offer ranges from 2 to 4 with mechanically controlled distributors. Flow regulator is available as option. The electronically controlled rear lift has a maximum capacity of 9700 kg and is equipped as standard with vibration damping function. The optional front lift has a capacity of 3850 kg and it can be completed with 2 hydraulics ways duplicated from rear spool valves. Front loader Ready, Intermediate and Light kit are even available as option.

The slimline new Sauter front carrier, which is integrated perfectly into the structure of the tractor, makes it possible to fit supplementary ballast weights close to the ground (up to 495 kg on versions with fixed axle and up to 330 kg on versions with suspension), while the impressive maximum permissible loads for the front axle (up to 5200 kg) and rear axle (up to 9200 kg) give these tractors extraordinary load capacity. The optional hydropneumatic front axle suspension system features a number of functions: adaptive damping stiffness control in relation to terrain conditions; load dependent self-levelling; anti-dive and anti-rise, which stiffen the suspension under acceleration and braking to increase driver comfort; and active anti-dumping, which continuously controls the suspension to limit pitching. The heavy duty rear axles of these tractor are equipped with a potent new multiple wet disc braking system with Powerbrake, a power assistance system which reduces the pedal force necessary to operate the brakes and permits up to 10 emergency brake applications even after the engine has been switched off.

The 6G Series offers the driver an ergonomic working environment bristling with high technology and with the comfort of your own lounge, with features such as new InfoCentre+ dashboard with LCD colour display. Thanks to Isobus connection, these tractors can be coupled with the latest implements to be ready for the challenges of moder agriculture. 6G models may be even automated with the addition of the SDF guidance system. The cab may be equipped with mechanical suspension, while driver seat is available with both mechanical and pneumatic suspension. A broad selection of working lights is available, from 2 front and 2 rear halogen lights up to 6+6 LED working lights, which ensure outstanding visibility even when working in the night. Rear visibility may be even further increased installing the 2 cameras available as option.